Feeds:
Posts
Comments

Posts Tagged ‘white’

Well I have been getting a lot of feedback on my newly redesigned master bedroom (thank you for all the nice comments!) and so I thought I’d better get the headboard tutorial up for those of you who are interested in DIY-ing one yourself.  This isn’t so much a tutorial on how to build an upholstered headboard (there are plenty of tutorials out there on that) but more how I handpainted the chevron-ikat pattern onto my plain white headboard fabric.   Since I’d never done anything like this before, I pretty much guessed my way through it so my headboard is far from perfect.  To be honest, I’m thinking about completely repainting it with my leftover fabric.  But, lucky for you, I can walk you through what I did right AND WRONG and you can learn from my mistakes and make yourself something beautiful.  The best part is you can use this fabric painting technique to paint anything, headboards, pillows, chairs, t-shirts, whatever.

Cost: Varies by project.  Mine cost about $18 for the fabric and paint

Supplies:

  • White or other light colored fabric.  I used 2 yards of white cotton twill (from Walmart for $5/yd) for my headboard.  Natural fabrics work best and allow the paint to bleed a little bit.
  • Craft paint in your color choices.  I used a limey green and a tealy blue.
  • Textile Medium.  To mix with the craft paint to make it soft like fabric paint.  (Or you could just save yourself this step and buy fabric paint instead).
  • A medium sized flat/square tipped craft paint brush.
  • A spray bottle with water in it.
  • A water bowl to rinse brushes.

Okay then.  Heres what I did:

1.  I first upholstered my headboard in the white fabric by staple-gunning the fabric around to the back of the padded headboard.  Then I layed my headboard flat on the table to start painting.

2.  Next I got a square tray I had (you could also use a right angle ruler if you have one) and trace the corners of it onto my headboard lightly with chalk.  DON’T use chalk to do this.  It sucked up my paint wherever it was and made some really distinct paint lines that I don’t love on the finished project.  You could try a pencil or just dots of the paint color you’ll be using to give you the guide you need.  I’ll be honest though.  I did this only for the top portion of my headboard and then got lazy and didn’t do it to the rest.  I wish I would’ve though because some of my lines got whompy because I was winging it without a guide.  Thats what I get for being an impatient crafter.

3.  Next, working in small sections, spray the fabric lightly with water.  I would recommend testing the amount of water you need to be spraying with the amount of bleeding you want to get on a scrap piece of fabric before you try this on the real thing.  I didn’t do this and learned as I went.  I got the right hand side of my headboard pretty soaked and then learned that “less is more” and so the left side has less bleeding (which I like better).  You probably only need to spray a section two maybe three times and no more.  You don’t want the lines to become tie-dyed looking, but you do want the colors to bleed slightly into eachother.

4.  Now, holding your brush so that the square tip is on its side (or that the tip of the paintbrush looks like a vertical line), dip your brush into the water and then into the first paint color (after mixing it with the textile medium per the instructions on the bottle).  Then follow your guide using up and down choppy strokes on your fabric.

5.  When you have a section done, switch colors and do the same thing with the next color except push that color into the first color a little bit.  You may have to give it a squirt with the water bottle if the fabric has dried.

6.  The ikat-ness of the design is dependent on how you’re holding your brush so practice first on a scrap piece until you feel like you’re getting the look you want.  Then paint your piece (in my case an upholstered headboard) alternating between wetting the fabric with the squirt bottle and painting on the lines in an up and down stroke.  (You can see in the image below where I wet the fabric too much and the paint bled a little more than I would’ve liked.)

And thats what I did!  I would like it much better I think if I did it again and really took my time.  But, hey, not too shabby for a first try I guess.

Anyway, hope you enjoyed the tutorial!  Learn from my mistakes and go do your own! 🙂

Read Full Post »

Hey again everyone!  I told you in the last post that I’d get some new pics of to show you Sawyer’s room now that its all done (13 months after his birth…don’t judge me).  Actually, its been done for a while I’m just slow at posting.  Theres really not TOO much that looks different from the nursery posts before this one, just a few added details that I think pull it all together.  Anyway, here it is.  All DONE.  🙂

Please ignore the stuff on the floor.  Sawyer was in here while I was taking these pics and was dragging all kinds of stuff out.  At least it shows how the room looks in reality!

The white Jenny Lind crib and changing table set I got off of Craigslist for $125.  The vinyl wall mural I found here.

I found the empty frame at Hobby Lobby in the clearance section for $8.  I made the banner with a template and cardstock and chipboard letters I covered in scrapbook paper.  Here is a template you can use to make your own.  (Just cut the little corners off when you fold the top over your string).

Above are some close-ups of Sawyer’s bunting name banner.

The woodsy vinyl wall mural totally MADE this room.  Since I wasn’t spending much on the rest of the room decor, I “splurged” on it and got it for around $100 or so.  I could pick the colors I wanted and I think it turned out FABULOUS against the teal wall.  (p.s.  Sawyer is so cute rockin his new mowhawk!)

A tree branch made the perfect curtain rod for this space.  I also used a tree branch for the DIY mobile below.

This mobile was SUPER EASY to throw together.  A tree branch+wooden cutouts in woodsy shapes from the craft store+orange craft paint+hemp string and a hook screw= a graphic naturalist simple baby mobile.  You can also buy a little hand drill in the wood pieces section of the craft store for easy hole drilling into small wood pieces like this.

The lamp above was made from an old shade I had leftover from a client’s house, and some extra orange and white fleece from other projects.  My little sis helped me cut out a bunch of “leaf shapes” alternating between regular scizzors and pinking shears.  Then I simply sewed them together like a long garland right down the center of each.  I then cut varying lengths off of the “leaf garland” and hot glued them to the lamp shade, being sure to cover the entire shade and vary the lengths that dangled.  It turned out pretty cute I think and was an easy way to add fun, whimsical lighting.

Sawyer’s baby quilt was another DIY project.  I had found a towel at Walmart for $4 that was the PERFECT color and then decided to applique birch trees and leaves onto it with scrap fabric from other projects for the room.  Then I simply bound and backed the entire “towel quilt” with white fleece.  It has held up really well through several washings and ties in the wall mural nicely.

Below is the block printed bird pillow I made.  Martha Stewart has a great tutorial on block printing using Speedy-Carve blocks here.

And below again is another pillow I hand stamped.  That tutorial can be found here.

I also made this DIY fabric wall art.  That tutorial is here.

And above is a pic of the white $4 thrifted antlers (I sprayed them white with high gloss spray paint), and a photo set I took and framed (got the white frames at the Dollar Store), and also a little owl I made with a hand towel and scrap fabric.  I love this little vignette.

So there you go!  This is my cheap and easy DIY’d, aqua, orange, brown, and white, vintage modern, refurbished, thrifted, woodland creatures, little boys nursery.  Phew.  Hope you like it and can go and DIY one for your little man (or woman) ! Happy crafting!

Read Full Post »

Yay!  I’m so excited to FINALLY have my craft room/office/music/guest room decorated and ready to use! Heres a bad picture that sort of gives you the idea of what it used to look like.  Sorry, I didn’t take many before pics.

As you can see,  this just shows you one side of the room where I housed all my craft junk.  Although it was somewhat organized into labeled bins, it looked super cluttered and chaotic.  The other side of the room had a small rickety computer desk and my keyboard on it.  And that was pretty much it.  Oh, by the way, if you read my sunburst mirror tutorial I described the “decorated” version of this room with the diarrhea wall color.  The pic above is before I painted it back then.  Sorry, I don’t have a pic of the ugly “decorated” room (I’m trying to block it from my memory).

Anyway, we really needed to be able to use this room as my craft room, our office, our music room to house my keyboard and our recording equipment, and a guest room for when family comes to visit from Idaho.  Thats a lot to ask of a relatively small space.  I sat in the room with a paper and pencil for like 20 minutes before I came up with a functional solution.  I decided the crappy desk had to go in order to free up that wall for a day-bed with trundle for guests.  That meant I’d have to reconfigure the shelving (thanks Daddy for putting it up for me!) and build a desk area on that side of the room.  This made my hubby happy when he saw it complete and realized how much extra desk space it created.  I also needed to fit my keyboard in there along with my drop-leaf craft table.  So the keyboard went on the wall by the closet door, I organized and put shelving in the closet to free up the floorspace which allows me now to be able to roll my craft table in there when I’m not using it, and I also brought an old bookcase that was in our garage in with some baskets to house guests’ items and create a little vanity area with a mirror and lamp.  And voila!! It is done.  And BONUS, my husband caved and agrees that it now looks much better and is much more functional.  Heres what it looks like now:

Awwww.  Much better.

The wooden day-bed and trundle were a $50 craigslist find and fit perfectly on the back wall.  I bought the white twin bedskirt at Target as well as the white comforter.

I REALLY needed some functional storage for all my craft supplies.  I found these photo boxes at Hobby Lobby for $4 each but I bought them on a 50% off day for $2 a piece.  Think outside the box (no pun intended) when looking for organizational supplies.  Office storage boxes like these were at least $6 each in the office supply section of the other stores I visited.   In the bottom left you can see some of my white stackable bins that I keep on the bottom shelf to store things I need often like scizzors, glue, markers, tools, etc, and I found them as a set of 3 at Walmart in the kitchen section.

Heres a peek at the “office” side.  Peyton really wanted to be in the picture.

A few Dollar Store clipboards got a makeover with ModPodge and scrapbook paper and keep our mail organized.

This frame was a quick project:  Take an old frame, paint it, attach wire or string across it in rows (I used push pins to hold it to the frame), and clip on small clothespins.  It makes a cute little photo/memo board.

This is my DIY mirror and a lamp that was needing a home.  I spray painted the lamp Jade from Krylon and sanded it back a little to distress it a bit.  I wanted a little place where guests could get ready and put some belongings.

These are the pen and ink sketches from this tutorial.  I bought the frames at the Dollar Store.

I layered tons of fun pillows on the day-bed which I just took from other places in my house.  I also took a paper lantern from my son’s room (he already had another lamp in there) and spruced it up a bit with some fabric flowers.  The tutorial for that is coming soon.  I bought an ugly painting a while back at a thrift store for $5 solely for the frame and painted the frame and a picture to go inside and hung it over the bed.

Here is a close up of the painting I did.  I wanted something kind of fun and quirky with just a POP of color.  I sketched the picture on a white canvas board (find canvas for really cheap at Walmart and BigLots) and then gave it a watercolored look with watered down acrylic craft paint.  I like that its imperfect and kind of whimsical.  The dusty blue-green fram makes it really pop off the white wall.  I spray painted the frame with Jade paint from Krylon and then glazed over it with watered down black craft paint and wiped it back before it dried with a paper towel.  Then I just set it all with a clear gloss spray lacquer.

I spruced up this lamp with singed fabric flowers I made and I think it really gives it a little more oomph.

This chalkboard was made by spray painting the old backing to a mirror (regular spray paint in a matte or satin finish works GREAT as a chalkboard on a smooth surface).  I decorated it with a white paint pen and hung it off of some silver chain I had.

And thats pretty much it!! It actually looks much better in person and I am loving the results!  I’m so excited to start using this room more now and my hubby is excited that craft junk will no longer be inhabiting the dining room table!  🙂

Read Full Post »

So sorry to everyone who has been waiting for a new post!  I had family in town and some pregnancy issues and just couldn’t get to my blog like I would’ve liked to last week.

First I want to show off how my baby boy nursery is coming along and the projects that have gone into creating it.  Heres a look at the nursery “BEFORE”:…and another:And heres what it looks like now:

(Remember the fabric artwork?  Doesn’t it look great in here!)And heres a close up of the little stuffed owl I made out of a hand towel and scrap fabric:And heres a better look at the easy DIY leaf lamp my little sis and I made out of polar fleece and an old lamp shade:The baby quilt was I made from a $4 bath towel, white polar fleece, and scrap fabric.  I just used the scrap fabric to applique birch trees that mimic the wall mural.  You can also get a look at the block printed bird pillow I made.And finally, heres the Alphabet Pillow that I will be showing you how to make right now.Theres still a lot I want to do in the nursery.  The drapes need to be hung (I’ll be using a tree branch as the curtain rod), I need to make the baby mobile (I’ll be using branches and wood craft cutouts of woodland creatures), once we pick out a name for this little guy I’d like to make some sort of name banner over the crib, and I’m in the process of crocheting a rag rug for the floor.  But, I’m loving the way its turning out so far.  My hubby was hesitant (I don’t get why he still doesn’t trust me) when he saw the aqua wall colors (he thought they were “too girly”), but once the mural was on the wall and the antlers were hung over the changing table, he was in love.  Now I catch him just sitting in the room with the lamp on, rocking in the chair.  Preparing the nursery has really made us both excited for baby boy #2.

Anyway, like I said, I’ll be showing you guys how to make the alphabet pillow today, but let me know if there are any other projects from the room that you’d like me to write a tutorial on and I’d be happy to share all of it with you.

So lets get started on this crazy easy pillow! Heres the breakdown:

Cost: Mine cost $0 to make since I had everything on hand already.  But if you don’t have everything I’d estimate the project will cost between $10-$15.

Supplies:

  • A white pillow (or pillow cover; check out Ikea for plain throw pillow covers in various shapes, sizes, and colors).  My pillows were actually pillow inserts that were meant to be covered but I just simply unstuffed them and then sewed them back up when I was done printing my letters on them.
  • Medium to large foam alphabet stamps.  I got mine at Michaels a while back and they are double sided with the capital letter on one side and the lower case letter on the other.  Any font will work as long as it is not TOO busy and easy to read.
  • Fabric paint in two colors that coordinate with the color scheme in the room.  I did this project obviously for my baby room which is in aqua and orange but I also think it would be smashing in a library or family room in more sophisticated colors.
  • Paper or cardstock to put inside the pillow case to prevent the paint from seeping through.
  • Foam brush to apply the paint to the stamp.
  • Iron to heat set the paint when dry.

And that is seriously it!  So easy and I bet you have a lot of this stuff on hand or you know a crafty friend who’d let you use hers.  Ready to go then?  Lets do this!

  1. Cut a hole big enough to get the stuffing out of the pillow along the seam of one of the sides of the pillow if you’re like me and using a pillow you already have.  If you have a pillow cover, simply lay it flat on the table and insert your pieces of cardstock.  Be sure to have enough cardstock in there to cover the entire portion that you’ll be stamping to prevent seepage (what a lovely word “seepage” is…ugh).
  2. Organize your stamps in alphabetical order so that you can work quickly and easily.
  3. Squirt your fabric paint colors onto your painting pallet (I use a plate covered in tin foil as my pallet).
  4. Okay, nows where you can decide how “perfect” you’d like your pillow to be.  Like I’ve said before, I like imperfect projects because I don’t have the patience to “perfect” them so I simply found the center of my pillow, decided how many letters I’d like on each row, and went for it.  But if you’d like something less “handmade” looking I suppose you could use a ruler and painters tape to tape off your rows like writing paper to insure that everything is straight.  If you are lacking the confidence to just “go for it”, I suggest that when you stamp your first pair of letters (a “pair” meaning the capital and the lower case) you do the pair that is going to be in the center of your pillow.  That will give you a good starting point to work the rest of your alphabet around.  Basically, step 4 is just to decide how you’d like to lay out your letters.  Heres my finished pillow again to give you a reference point:You can see I did 4 letters across and 6 letters down with the “Y” and the “Z” in the center at the bottom.  Based on the size of your pillow and the size of your stamps, you can play around with the layout to find which you’d like best.
  5. Once you got a plan of action you can now decide which letters you’d like to POP out by using the second accent color.  I was originally just going to choose random letters throughout the alphabet to paint in orange (my accent color) but then my little sister Jenna came up with the brilliant idea to spell “F-O-X” with my accent letters.  I thought it was great since the letters happened to fall in such a way that your eye read them as “fox” and that it was inkeeping with my woodsy theme for the room.  You can try doing a word like this or just accent random letters.  Whatever you decide, I love the look of just a few simple letters standing out on the pillow like this.
  6. Once you’ve decided, its time to get stamping!  Are you ready for this?  The trick is to wet the letter stamp with not too much and not too little paint and to quickly and firmly press straight down onto your fabric and pull up.  If you press at an angle or move you’ll smudge your letters so it might be a good idea to practice a few letters on some scrap fabric until you feel like you got the hang of it.  Heres my craft stamps I used to do this project.  (Sorry its kind of upside down but you get the idea).And heres a look at my pillow halfway complete.  A little skeewampus but I guess I’m a little skeewampus myself so its befitting.
  7. Once you have all your letters stamped onto your pillow, allow adequate time to dry (it took mine about 30 minutes but follow the instructions on the paint you have) and then heat set with a dry iron if your paint so requires.  Most fabric paints will.
  8. If you printed your alphabet on a pillow cover then YOU’RE ALL DONE!!! But if you’re like me, you simply need to restuff and fluff your pillow and sew the seam closed.

And thats it my friends!! So EASY and cute isn’t it!  Here are some more tips and ideas you can use for this same project:

  • Dye your plain white pillow case with teabags and use sepia tones for your letter colors to make a vintagey fun alphabet pillow for your home or office.
  • Use foam letter stamps in different sizes and fonts to create a oober-eclectic alphabet pillow.
  • Try to highlight your little ones name in the alphabet by stamping out the letters of their name in the accent color.

What do you think?  Can you do it!? Of course you can!!! Have fun and let me know how yours turn out!  Stay tuned for my next tutorial “How to Make an Antique Clay Rose Necklace”. Tata for now and happy crafting everybody!

Read Full Post »